Serving Dallas-Fort Worth & 17 surrounding towns
Emergency calls prioritized
Cooling · Heating · Air Quality
Fast response · Dallas-Fort Worth metro
You describe the problem once. We connect you with an independent, licensed HVAC technician in our network — anywhere from Dallas to Fort Worth and the suburbs between — and you get the diagnosis and a written price before any work begins.
Free referral service. By calling, you agree to be connected with an independent third-party HVAC provider. Calls may be recorded for quality and training. Privacy
Near me
Call with your address and we will confirm service and connect you with a licensed HVAC technician. Browse local service areas below.
Call for local service
(214) 555-0147
Free referral service. By calling, you agree to be connected with an independent third-party HVAC provider. Calls may be recorded for quality and training.
Emergency calls prioritized
Describe the problem once — we match it to a licensed HVAC technician who does that work.
Every HVAC technician in our network is licensed in Texas and runs their own shop.
No cooling in extreme heat, gas smells, and CO alarms are treated as urgent. Gas or CO: leave first, call 911.
No cooling, a gas smell, or a CO alarm?
Don't wait on a form — call now and we'll connect you fast.
What we connect you with
Every service below is performed by an independent licensed HVAC technician in our network — not by SteadAir itself.
AC repair, replacement, and tune-ups for North Texas heat.
Furnace repair and replacement, plus carbon monoxide safety checks.
Heat pumps and ductless mini-splits for homes without room for ducts.
Duct cleaning and sealing, purification, and humidity control.
Full system replacement, smart thermostats, zoning, and inspections.
Troubleshoot
Pick the symptom — we'll show likely causes and the right next step.
What's happening?
Common causes
How it works
Call or request service online. Tell us the symptom, your ZIP, and when you need help.
We match your job to an independent licensed HVAC technician in our network who serves your town.
The HVAC technician diagnoses the issue, explains it plainly, and prices the work before starting.
The HVAC technician pulls any required mechanical permits and the work is inspected to city code.
Where we work
From the Dallas and Fort Worth cores to the Collin County suburbs, Denton County, and the Mid-Cities.
See if an HVAC technician in our network serves your area.
One request reaches up to three HVAC technicians near you. Compare, then choose.
Request serviceLocal knowledge
HVAC work here has quirks — brutal attic heat, moving clay soil, and sudden freeze snaps. Here's what actually matters.
North Texas summers push past 100°F for weeks, and attic air handlers bake in 130°F+ air. Capacitors, blower motors, and refrigerant charge all fail under that load — usually on the hottest afternoon of the year. A spring tune-up is when most of those failures get caught early.
AC maintenance →The Collin and Denton County building boom filled Plano, Frisco, and McKinney with two-story homes served by a single attic system. Hot upstairs bedrooms are usually a duct, zoning, or airflow problem — not a reason to replace the whole system.
Zoning systems →Blackland Prairie clay expands when wet and shrinks when dry, and Dallas-Fort Worth homes move with it. Duct connections in slab and crawlspace homes pull apart over the years, quietly dumping cooled air where nobody lives. Sealing and re-supporting ducts is unglamorous work that pays back every month.
Duct sealing & repair →Learn
Short, practical reads — what to check, when to call, what it involves.
Troubleshooting
An AC blowing warm air is most often set to fan-only or heat by mistake, has a clogged filter, lost power to the outdoor unit, or is low on refrigerant. Check the thermostat mode, filter, and outdoor disconnect first. If the outdoor unit runs but the air stays warm, call a licensed HVAC technician in our network for diagnosis.
Troubleshooting
An AC that runs but does not cool the house usually has restricted airflow, a dirty outdoor coil, low refrigerant, or leaky ducts. Check the filter, confirm every supply vent is open, and rinse debris off the outdoor coil. If the indoor temperature keeps rising on a normal day, call a licensed HVAC technician in our network.
Cooling
A frozen evaporator coil is caused by too little airflow across the coil or too little refrigerant inside it. Turn the cooling off, set the fan to ON to thaw the coil, and replace a clogged filter. Once thawed, a licensed HVAC technician in our network must fix the airflow or leak cause, or the coil will freeze again.
Costs & Decisions
The cost of a new HVAC system is set by system size and type, efficiency rating, duct condition, and the labor to install it correctly in your home. This guide lists factors only, with no prices, because an accurate quote requires a load calculation and a look at your ducts and electrical setup. A licensed HVAC technician in our network provides a written quote after that assessment.
Example
FAQ
SteadAir is a referral service for the Dallas–Fort Worth area. When you call (214) 555-0147 or request service, SteadAir connects you with a licensed HVAC technician in our network who handles the job directly, from diagnosis to the finished work.
A licensed HVAC technician in our network is licensed to do HVAC work in Texas and carries their own insurance. You can ask the technician for their license number before any work begins, and refrigerant work is done under EPA Section 608 certification.
Leave the house immediately and call 911 from outside, then call Atmos Energy. Do not flip light switches, open the garage door with an opener, or go back inside until responders clear the home. Gas leaks and carbon monoxide are never wait-and-see situations.
System replacements and most major HVAC work require a permit and inspection in most DFW cities, while simple repairs usually do not. The technician confirms the requirement for your city and pulls the permit when one is needed.
Cost depends on the failed part, system type, access, and permit requirements, which is why every service page lists cost factors instead of prices. The technician gives you a written price before work starts, after diagnosing the system in person.
SteadAir connects callers with technicians across the Dallas–Fort Worth metro, including Dallas, Fort Worth, Plano, Arlington, Irving, Garland, Frisco, McKinney, Denton, and nearby cities. Enter your ZIP on any page or call (214) 555-0147 to check coverage for your address.
Get connected
Two minutes. We'll match your job to a licensed HVAC technician who serves your town.
Step 1 of 3
Prefer to talk? Call (214) 555-0147
SteadAir Heating & Cooling
Tell us what's going on — we'll connect you with a licensed local HVAC technician who explains the problem before fixing it.
